29. Aachener Kolloquium Fahrzeug- und Motorentechnik 2020

2-Butanol – Ein Kraftstoff von morgen für die Motoren von heute?

Autoren

Dr.-Ing. Felix Eitel, Arjun Chandrashekar, M. Sc., Dipl.-Ing. Arndt Döhler, Dipl.-Ing. Jan Fritzsche, Opel Automobile GmbH, Rüsselsheim, Germany;
Christian Wouters, M. Sc., Univ.-Prof. Dr.-Ing. Stefan Pischinger, Institute for Combustion Engines (VKA), RWTH Aachen University, Aachen, Germany

Zusammenfassung

Regeneratively produced 2-butanol is considered as a promising candidate in the context of future alternative fuels. Since chemical and physical properties of 2-butanol enable the substitution of fossil gasoline, this fuel could serve as a significant lever for CO2 reduction. Therefore, the suitability of 2-butanol for gasoline combustion engines in the existing fleet is examined in this article. 3D-CFD simulations have been used to compare mixture preparation based on the calibration of numerical models using results from the spray laboratory. Bench tests have been conducted on a turbocharged 3-cylinder gasoline engine with direct injection. This engine was operated with gasoline according to EN228, 2-butanol and blends of these fuels without any hardware modifications. Particular focus of the evaluation was on the thermodynamic efficiency and raw emissions.

Mitglieder des Österreichischen Vereins für Kraftfahrzeugtechnik haben Zugriff auf alle Vorträge der Internationalen Wiener Motorensymposien.

Mitglieder-Login
Zur Suche