ÖVK Publication

Alcoholic fuels in diesel engines. Methanol, ethanol and butanol.

Authors

Dipl.-Ing. Aleksandar Damyanov, IFA, Technische Universität Wien

Year

2019

Print Info

Production/Publication ÖVK

Summary

On a modified diesel engine at the Institute for Powertrains and Automotive Technology at the Vienna University of Technology, fuel-specific combustion processes are being developed and analysed regarding their feasibility, efficiency and emissions. This article handles the operation of a diesel engine with bio-alcohols. The investigated fuels are methanol, ethanol and butanol.
Due to the very low cetane number of these alcohols, their usage is normally assumed with spark ignition engines but not with a compression ignition engine. However, there are technical possibilities for alcoholic fuel utilization in a diesel engine: 1) small amounts of the alcohol may be added to the conventional diesel fuel and 2) the diesel engine may be modified to operate in a dual-fuel mode, whereas the alcoholic fuel is fed into the intake manifold and the diesel is directly injected into the combustion chamber. The addition of 10 or 20 vol% alcohol to the diesel fuel results in a reduction in soot emissions, especially at low loads. No significant efficiency differences to diesel reference operation are determined when operating with alcohol-diesel blends. By supplying alcohols into the intake manifold, depending on the operating point, substitution potentials of up to 85% energy share can be achieved before unwanted combustion phenomena prevent a further increase of the alcohol amount. At higher loads within this operation mode, the efficiency is increased by almost 2% points. The observed strong decrease in particle mass and particle number allows a further reduction of the nitrogen oxide emissions.

Members of the Austrian Society of Automotive Engineers have access to all lectures of the International Vienna Motor Symposia.

Members Login
Back to search